Schneider ATSU01N222LT Soft starter for asynchronous motor - ATSU01 - 22 A - 200..480 V - 4..11 KW
| range of product |
Altistart U01 and TeSys U
|
|
|---|---|---|
| product or component type |
Soft starter
|
|
| product destination |
Asynchronous motors
|
|
| product specific application |
Simple machine
|
|
| device short name |
ATSU01
|
|
| network number of phases |
3 phases
|
|
| [Us] rated supply voltage |
200...480 V - 10...10 %
|
|
| motor power kW |
11 kW 3 phases 400 V
4 kW 3 phases 230 V 7.5 kW 3 phases 400 V 5.5 kW 3 phases 230 V |
|
| motor power hp |
5 hp 3 phases 230 V
7.5 hp 3 phases 230 V 10 hp 3 phases 460 V 15 hp 3 phases 460 V |
|
| IcL starter rating |
22 A
|
|
| utilisation category |
AC-53B EN/IEC 60947-4-2
|
|
| current consumption |
100 mA
|
|
| type of start |
Start with voltage ramp
|
|
| power dissipation in W |
2.5 W at full load and at end of starting
222.5 W in transient state |
| assembly style |
With heat sink
|
|
|---|---|---|
| function available |
Integrated bypass
|
|
| supply voltage limits |
180...528 V
|
|
| supply frequency |
50...60 Hz - 5...5 %
|
|
| network frequency |
47.5...63 Hz
|
|
| output voltage |
<= power supply voltage
|
|
| [Uc] control circuit voltage |
24 V DC +/- 10 %
|
|
| starting time |
1 s 100
10 s 10 5 s 20 Adjustable from 1 to 10 s |
|
| deceleration time symb |
Adjustable from 1 to 10 s
|
|
| starting torque |
30...80 % of starting torque of motor connected directly on the
line supply
|
|
| discrete input type |
Logic LI1, LI2, BOOST stop, run and boost on start-up functions
<= 8 mA 27 kOhm
|
|
| discrete input voltage |
24...40 V
|
|
| input output isolation |
Galvanic between power and control
|
|
| discrete input logic |
Positive LI1, LI2, BOOST < 5 V and <= 0.2 mA > 13 V >= 0.5 mA
|
|
| discrete output current |
2 A DC-13
3 A AC-15 |
|
| discrete output type |
Open collector logic LO1 end of starting signal
Relay outputs R1A, R1C NO |
|
| discrete output voltage |
24 V 6...30 V open collector logic
|
|
| minimum switching current |
10 mA 6 V DC relay outputs
|
|
| maximum switching current |
2 A 30 V DC inductive cos phi = 0.5 20 ms relay outputs
2 A 250 V AC AC-15 inductive cos phi = 0.5 20 ms relay outputs |
|
| maximum switching voltage |
440 V relay outputs
|
|
| display type |
1 LED green starter powered up
1 LED yellow nominal voltage reached |
|
| tightening torque |
1.9...2.5 N.m
0.5 N.m |
|
| electrical connection |
4 mm screw clamp terminal rigid 1 1...10 mm² AWG 8 power circuit
Screw connector rigid 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal rigid 2 1...6 mm² AWG 10 power circuit Screw connector rigid 2 0.5...1 mm² AWG 17 control circuit Screw connector flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal flexible without cable end 1 1.5...10 mm² AWG 8 power circuit Screw connector flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal flexible with cable end 2 1...6 mm² AWG 10 power circuit 4 mm screw clamp terminal flexible without cable end 2 1.5...6 mm² AWG 10 power circuit Screw connector flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit |
|
| marking |
CE
|
|
| operating position |
Vertical +/- 10 degree
|
|
| height |
314 mm
|
|
| width |
45 mm
|
|
| depth |
170 mm
|
|
| product weight |
0.49 kg
|
|
| Motor power range AC-3 |
7...11 kW at 380...440 V 3 phases
4...6 kW at 200...240 V 3 phases |
|
| motor starter type |
Soft starter
|
Schneider ATSU01N222LT Soft starter for asynchronous motor
- Brand: Schneider
- Product Code: ATSU01N222LT
- Availability: 10
-
$1,000.00
- Ex Tax: $1,000.00
Tags: ATSU01N222LT