Delta DVP02TUN-S Universal Analog Input Controller Module, 2 Channel, 16 Bit, 4 Disk. output (NPN, transistor)

Main characteristics:

Supply voltage	24 V DC
Power consumption	2.4 W maximum
Input signal	Thermocouples: J, K, R, S, T, E, N, B, U, L, TXK (L), C, PL II Thermal Resistors: Type Pt100, JPt100, Pt1000, Ni100, Ni1000, Cu50, Cu100, GNi1000 Analog : 0 ~ + 50mV, 0 ~ + 5 V, 0 ~ + 10 V, 0 ~ + 20 mA, 4 ~ + 20 mA
Reaction time	Analog input: from 5 ms Thermocouple: 130 ms Thermal resistance: 260 ms
Control method	PID-controller PID-controller with program control Dual- mode control Two-position controller (ON / OFF) (except DVP02TKL-S) Manual mode
Control outputs	R: 4 relay outputs, - 250 V AC / 24 V DC, 2 A (resistive load) N: 4 transistor pulse outputs (NPN), 0.3 A (resistive load) L: 2 analog outputs (0 ~ 10 V, 0 ~ 20 mA, 4 ~ 20 mA)
Output functions	Control output, signal output (except DVP02TKL-S) relay output mode (only for DVP02TKL-S)
Alarm functions	13 alarm modes (except DVP02TKL-S)
RS-485 communication	MODBUS ASCII / RTU, 9600 ~ 115200 bits / s
Operating ambient temperature	0 ° - + 55 ° С
Storage temperature	-25 ° - + 70 ° С
Maximum installation height	2000 m. Above sea level
Humidity of the environment	5% - 95% relative humidity (without condensation)

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Please complete the captcha validation below

Delta DVP02TUN-S Universal Analog Input Controller Module

Qty